BYBPL - SINTEC ULTRA DEEP BASE, YELLOW, 7548
- MSDS: BYBPL
- Manufacturer: SINCLAIR PAINT CO
- Product Name: SINTEC ULTRA DEEP BASE, YELLOW, 7548
- National Stock Number: 8010-00N061999
Product Identification
Product ID:SINTEC ULTRA DEEP BASE, YELLOW, 7548
MSDS Date:06/21/1994
FSC:8010
NIIN:00N061999
MSDS Number: BYBPL
Responsible Party
LOS ANGELES, CA 90040
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 213-888-8888
Preparer: J G PRINZ
Cage: 0U0K0
Contractor
Telephone: 213-888-8888
Cage: 0U0K0
Ingredients
SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (ALIPHATIC
CAS: 64742-88-7
Fraction By Weight: 20%
OSHA PEL 500 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
5.1 @ 68F
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 1%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM/150STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
2.98 LB/GL (357 G/L) (COATING);
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: EXCESS INHAL OF VAPS CAN
CAUSE NASAL & RESP IRRIT, WEAK, DIZZ, FATG, NAUS, HDCH & POSS UNCON
& EVEN ASPHY. SKIN: RPTD/PRLNG CONT CAN CAUSE MOD IRRIT, DEFAT,
DERM. EYES: CAN CAUSE IRRIT, REDNESS, TEARING & BLURRED VISION.
SKINABSORPTION: ORG SOLV EASILY ABSORBED. DRYING OF SKIN, REDNESS/
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: DERM ARE SIGNS OF RPTD/OVEREXP TO
THEIR DEFAT ACTION. INGEST: CAN CAUSE GI IRRIT, NAUS, VOMIT &
DIARR. CHRONIC: PRLNG/RPTD EXPOS ABOVE TLV MAY RSLT IN PERM BRAIN &
CNS DMG.
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:EYES: FLUSH IMMED W/LGE AMTS OF WATER FOR AT LEAST 15 MIN.
TAKE TO MD FOR MED TREATMENT. SKIN: WASH AFFECTED AREAS W/SOAP &
WATER. REMOVE CONTAM CLTHG. CONSULT MD IF IRRIT PERSISTS. INHAL:
REMOVE TO F RESH AIR. RESTORE BRTHG. TREAT SYMPTOMATICALLY. CONSULT
MD. INGEST: DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE
VOMIT. CONSULT MD/POIS CTL CTR IMMED. TREAT SYMPTOMATICALLY.
Fire Fighting
Flash Point Method:TCC
Flash Point:100F,38C
Lower Limits:1.0%
Upper Limits:7.0%
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL,
WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. FIGHT AS VOLAT LIQ FIRE. CLSD CONTRS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. KEEP AWAY FROM (SUP DAT)
Unusual Fire/Explosion Hazard:AVOID APPLICATN IN AREAS OF PILOT
LIGHTS/SPARKS/OTHER IGNIT SOURCES AS VAPS MAY ACCUM ON FLOOR &
IGNITE. KEEP CONTRS CLSD TIGHTLY IN COOL PLACE WHEN NOT IN USE.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. DIKE, CONTAIN,
OR ABSORB WITH INERT MATERIALS (SAND, VERMICULITE, ETC). TRANSFER
TO CONTAINERS FOR RECOVERY OR DISPOSAL. PREVENT RUNOFF INTO SEWERS,
STREAMS, OR OTHER B ODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT TAKE INTERNALLY. AVOID
PROLONGED OR REPEATED EXPOSURE TO LEVELS ABOVE TLV.
Other Precautions:REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING AND INHALING THIS PRODUCT MAY BE HARMFUL OR FATAL.
Exposure Controls
Respiratory Protection:IF TLV IS EXCEEDED, USE NIOSH/MSHA APPROVED
ORGANIC VAPOR AND MIST, SUPPLIED AIR OR SCBA.
Ventilation:USE ADEQUATE MECHANICAL (GENERAL AND/OR LOCAL) VENTILATION
TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:RESISTANT, SUCH AS NITRILE RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING. EMERGENCY EYEWASH
& DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
FIRE FIGHT PROC: AREAS EXPOSED TO FIRE.
Chemical Properties
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.0 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NONE
Appearance and Odor:TYPICAL FOR SOLVENT BASED COATING
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HIGH TEMPERATURES OR OPEN
IGNITION SOURCES.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CARBON
DIOXIDE, CARBON MONOXIDE, VARIOUS HYDROCARBONS, ETC., ON THERMAL
DECOMPOSITION.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.